Traditional Metal Braces
Traditional braces have been around for a long time, and they’re probably the most recognizable symbol of orthodontics. These orthodontic workhouses have a long history of successful treatment, and are great at correcting many oral issues.
What Are Braces Made of?
The brackets are durable and made from a mix of stainless steel and other metals.
Brackets have little hooks or doors where a wire is threaded. A bracket can be secured by closing the door, or by placing an elastic over the top of the wire.
This is what Dr. Vermette will use to attach the brackets to your teeth. It’s common to attach the bracket directly to the tooth with a sealer.
This thin piece of metal runs from one bracket to another. Dr. Vermette will change the shape and curvature of the wire to move your teeth in the right direction.
The wire will attach all of your bottom or upper teeth together in many cases. We might occasionally cut the wire if connecting just a few teeth is better for your treatment plan.
If you need bite correction, elastics are essential. They are generally strung between an upper bracket hook and a lower bracket hook. This will pull the upper jaw backward to correct an overbite, or the lower jaw back to correct an underbite.
We may use rubber bands for many different situations, especially when we want to put extra pressure on the teeth or jaws.
These are stainless steel rings that are cemented to your teeth using dental bonding agents. These bands can provide an anchor for your braces and orthodontic appliances, but they are not used for everyone.
These small elastic “donuts” or rings can be used to create space in between your teeth when needed, typically before bands are placed. They are sometimes referred to as spacers.
These tiny rubber rings or bands are used to attach the archwire to the brackets. They’re less rigid than separators and come in dozens of colors.